4.3.2Install satellites 2/6
2 Connection type
Before you select Start, you must set up the connection
type. The connection type will determine the number of
LNBs (the number of different satellites) you can install.
For ease of use, select the correct type for the number of
satellites you want to install.
To set up the connection type, select Settings and press
OK. Select Connection type and select One LNB if you
have only one LNB, select DiSEqC Mini for 2 LNBs or select
DiSEqC 1.0 to install 3 or 4 LNBs. Select Done to close the
settings.
. . .
To Next Page