Philips 32PFL8605K - Page 308

4.6.3Update with USB 4/5
If a power cut occurs during the update, never remove the
USB memory from the TV. When the power returns, the
update will continue.
At the end of the update, the message Operation succesful
appears on screen. Remove the USB memory and press O
on the remote control.
Do not . . .
• press O twice
• use the O switch on the TV
The TV switches itself off (for 10 seconds) and then back on
again. Please wait.
The TV software has been updated. You can use the TV
again.
. . .