Mechanical Instructions
EN 18 Q552.1E LA4.
2010-Feb-19
back to
div. table
Figure 4-18 LCD board -2-
Warning!
The snaps on the backside of the LCD Panel secure the
backlight units and should never be released!
1. Remove the tweeters as earlier described.
2. Remove the central subwoofer as earlier described.
3. Remove the mains switch as earlier described.
4. Remove the Main Power Supply board as earlier
described, together with its back shielding.
5. Remove the Small Signal Board as earlier described,
together with its back shielding.
6. Remove the cable from the clamp [1].
7. Remove the stand [2] together with its subframe [3].
8. Detach the front bezel together with the IR & LED board
and Keyboard Control board as earlier described.
9. Ensure all (sub-) frames, boards and cables that do not
belong to the LCD panel are removed before sending the
LCD Panel in.
18770_121_100212.eps
100212
Do not releaseDo not release
To Next Page
Loading...
