Mechanical Instructions
EN 17Q552.1E LA 4.
2010-Feb-19
back to
div. table
Figure 4-15 IR & LED board
1. Detach the front bezel from the set as earlier described.
2. Release the clips [1] that secure the IR & LED board in the
bezel and take the board out.
3. Unplug the connectors.
When defective, replace the whole unit.
4.5.8 Keyboard Control Board
Refer to Figure 4-16
for details.
Figure 4-16 Keyboard Control board
1. Detach the front bezel from the set as earlier described.
2. Unplug the connector [1].
3. Release the clips that secure the board [2] and take the
board out.
When defective, replace the whole unit.
4.5.9 LCD Panel
Refer to Figure 4-17
and Figure 4-18 for details.
Figure 4-17 LCD board -1-
18770_127_100215.eps
100215
1
18850_104_100203.eps
100203
2
1
18770_128_100215.eps
100215
1
2
3
2
2
3
3
3
2
To Next Page
Loading...
