Mechanical Instructions
EN 16 Q552.1E LA4.
2010-Feb-19
back to
div. table
4.5.5 Small Signal Board (SSB)
Refer to Figure 4-12
and Figure 4-13 for details.
Figure 4-12 SSB
Figure 4-13 SSB - back shielding
1. Unplug all connectors [1] and [2].
2. Remove the fixation screws [3].
3. Take the board out.
When defective, replace the whole unit.
When remounting, ensure that the back shielding plate is
positioned correctly.
4.5.6 Front Bezel
Refer to Figure 4-14
for details.
Figure 4-14 Front Bezel
1. Remove the mains switch as earlier described [1].
2. Remove the clamps [2].
3. Remove the screws [3].
The front bezel will now be detached from the set, together with
the IR & LED- and Keyboard Control Panel.
4.5.7 IR & LED Board
Refer to Figure 4-15
for details.
18770_124_100215.eps
100217
1
2
3
3
3
3
3
3
3
3
18770_125_100215.eps
100215
1
8770_126_100215.eps
100215
333
3
3
3
3
3
3
3
3
3
1
2
2
2
To Next Page
Loading...
