Mechanical Instructions
EN 13Q548.1E LB 4.
2009-Dec-18
Figure 4-4 LCD Panel removal (2/3): Subframe with panels and cables
Figure 4-5 LCD Panel removal (3/3): Bare LCD panel after removal subframe
4.4 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
• While re-assembling, make sure that all cables are placed
and connected in their original position.
See also Figure 4-1
.
• Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.
18670_101_090911.eps
090911
18670_102_090911.eps
090911
To Next Page
Loading...
