Mechanical Instructions
EN 12 TPN16.2E LA4.
2016-Jul-15
back to
div. table
4.3.2 Rear Cover
Refer to Figure 4-5
for details.
Warning: Disconnect the mains power cord before removing
the rear cover.
1. Remove the fixation screws [2] and [3] that secure the rear
cover. Refer to Figure 4-5
for details.
2. Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
Figure 4-5 Rear cover removal
4.3.3 Keyboard Control unit
Refer to Figure 4-7
for details.
1. Unplug the connector[2] from the keyboard control panel.
2. Remove all the fixation screws from the keyboard [1].
When defective, replace the whole unit.
Figure 4-6 Keyboard removal
20060_104.eps
2
2
2
2
2
2
2
2
2
2
2
2
3
M3× 8
2
M3× 6
3