Mechanical Instructions
EN 13QM16.4E LA 4.
2016-Apr-1
back to
div.table
4.3 Assembly/Panel Removal
Instructions below apply to the 32PFS5501/12, but will be
similar for other 32"/40"/49"Pxx5501 series models.
4.3.1 Rear Cover
Refer to Figure 4-5
and Figure 4-6 for details.
Warning: Disconnect the mains power cord before removing
the rear cover.
1. Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set.
2. Remove the fixation screws [2], [3] and [4] that secure the
rear cover. Refer to Figure 4-5
for details.
3. Unplug the connector [5] from SSB. Refer to Figure 4-6
for
details.
4. Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
Figure 4-5 Rear cover removal[1]
Figure 4-6 Rear cover removal[2]
20050_103.eps
2
2
2
4
4
4
2
2
2
2
2
2
2
2
1
1
1
1
3
3
1
M4 × 14
M3× 6
Q3× 8
2
M3 × 6
3
To Next Page
Loading...
