Mechanical Instructions
EN 42 TPM14.2E LA4.
2014-Sep-26
back to
div. table
Figure 4-44 Rear cover removal
4.9.2 AmbiLight Panel
Refer to Figure 4-45
for details.
1. Gently release the clamps and unplug the two connectors
[1, 2,3] that secure the ambilight panels. Release the clips
from the FFC connector that connect with the AmbiLight
control panel [3].
2. Lift the AmbiLight panel from the rear cover. Make sure that
wires and flat foils are not damaged while lifting the
ambilight panel from the rear cover.
19614_107.eps
1
M4 × 10
Q3 × 8
1
1
1
2
2
2
2
2
2
2 2 2 2 2 2 2 2
2
2
2
2
2
2
2
2
2
1
3
3
3
M3 × 6