Philips 42HFL5682D/F7 - TV Software Upgrade; Upgrade Source and Direction

Alignments
EN 26 TPB1.2HU LA6.
2011-Mar-11
6.4 Option Settings
6.4.1 Reset Options
In SAM, after reset “Reset option code”, restart the set
immediately.
6.4.2 Display option code overview
Blind SAM-mode is used to set a display option in the set, while
not having a picture:
1. To access the Blind SAM mode, the user must unplug any
board connected to the back-end board.
2. Cool start the set.
3. Press "062598 + MENU + Panel ID" on the RC command
to set up panel ID.
Table 6-3 Display option code overview
CTN_ALT BOM# Panel Type Panel ID
22HFL5662H/F7 LG LC216EXN-SCA1 100
26HFL5662H/F7 LG LC260EXN-SCB1 101
32HFL4462F/F7 LG LC320WXN-SCA1 105
32HFL5662D/F7 LG LC320WXN-SCA1 105
32HFL5662H/F7 LG LC320WXN-SCA1 105
37HFL4482F/F7 LG LC370WUN-SCC1 103
37HFL5682D/F7 LG LC370WUN-SCC1 103
42HFL4482F/F7 LG LC420WUN-SCB1 104
42HFL5682D/F7 LG LC420WUN-SCB1 104
42HFL5682H/F7 LG LC420WUN-SCB1 104