HDR Control
HDR Effect Settings
(Home) > Settings > Picture > Contrast > HDR control
> HDR10/ HDR10+ effect / HLG effect.
You can adjust the HDR effect level to Off, More details,
Balanced or More brightness for the HDR contents.
Colour Settings
(Home) > Settings > Picture > Color.
Saturation
(Home) > Settings > Picture > Color > Saturation.
To adjust the value of saturation for the colors.
Note: not available when picture style is Monitor or HDR
Monitor.
Adjust the color enhancement
(Home) > Settings > Picture > Colour > Color
enhancement.
Select Maximum, Medium, Minimum or Off to set the
level of the color intensity and the details in bright colors.
Note: not available when picture style is Monitor / HDR
Monitor
Adjust the wide colour gamut
(Home) > Settings > Picture > Colour > Wide colour
gamut.
To switch on/off of wide colour gamut. Applicable to
some TV models only.
Adjust color temperature
(Home) > Settings > Picture > Color > Color
temperature > Whitepoint.
Select Warm, Normal, Cool or Custom to set the color
temperature for your preference.
(Home) > Settings > Picture > Color > Color
temperature > 2 whitepoint alignment.
Customise the whitepoint alignment based on the
selected color temperature of the picture.
Sharpness
Enhancement
(Home) > Settings > Picture > Sharpness >
Enhancement.
To adjust the sharpness value of the picture.
Texture enhancement
(Home) > Settings > Picture > Sharpness > Texture
enhancement.
Switch on to have a superior sharpness in line edges and
details.
Picture Clean
Noise reduction
(Home) > Settings > Picture > Picture clean > Noise
reduction
Select Off, Maximum, Medium, Minimum to set the
level for removing the noise in video content.
Noise is mostly visible as small moving dots in on-screen
picture.
* Note: The Noise reduction settings are not available
when input source frame rate is higher than 120Hz.
Artefact reduction
(Home) > Settings > Picture > Picture clean >
Artefact reduction
Select Off, Maximum, Medium, Minimum to have
different degrees of smoothing the artefact in digital
video content.
Artefact is mostly visible as small blocks or jagged edges
in on-screen images.
* Note: The Artefact reduction settings are not available
when input source is 4K resolution.
Quick Picture Settings
(Home) > Settings > Picture > Quick picture settings
• During the first installation, you did some picture
settings in a few easy steps. You can redo these steps
with Quick picture settings menu.
• Select the picture setting you prefer and go to the next
setting.
• To do these steps, make sure the TV can tune to a TV
channel or can show a programme from a connected
device.
32
To Next Page
Loading...
