Philips 46inch LCD TVchassis PL13.14 - Cabinet Disassembly Instructions

4-1 PL13.14-A_DC
CABINET DISASSEMBLY INSTRUCTIONS
Screw Torque Specification
* For reference
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
*1: TYPE A
*2: TYPE B
*3: 46PFL3608/F7 (Serial No.: DS2),
46PFL3908/F7 (Serial No.: DS2),
46PFL3908/F8 (Serial No.: XA2),
46PFL3608/F7 A (Serial No.: DS3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
Ref.
No.
Part
Number
Part Name
Tightening
Torque
L6 GCJP3100
SCREW F-PAN 3CHROM
+P-TITE M3X10.0
5.2±0.9lb·in
L10 GCHP3120
SCREW F-PAN BLACK_NI
+P-TITE M3X12.0
6.1±0.9lb·in
L23 GBJS3060
SCREW BIND 3CHROM
+S-TITE M3X6.0
5.2±0.9lb·in
L24 GBHS3060
SCREW BIND BLACK_NI
+S-TITE M3X6.0
L35 GBJB3080
SCREW BIND 3CHROM
+B-TITE M3X8.0
5.2±0.9lb·in
L44 FPJ34080
SEMS-SW PAN 3CHROM +
M4X8.0
6.9±0.9lb·in
L66 GBJS9060
SCREW BIND 3CHROM
+S-TITE M2.6X6.0
4.3±0.45lb·in
SSK1 1ESA34506
STAND SCREW KIT
(SEMS-SW PAN BLACK_NI
+ M4X12.0)
(approx.
8.7±0.9lb·in)
*
[1] Stand Hinge
Assembly
[3] Rear Cover
[9] Function
CBA Unit
[10] Stand Bracket
[12] T-CON CBA
Unit
[6] Speaker
[11] LCD Panel
Assembly
[2] Stand Base
Assembly
[4] Power Supply
CBA
[7] Bottom
Cover L
[8] Bottom
Cover R
[13] IR Sensor
CBA Unit
[14] Front Cabinet
[5] Digital Main
CBA Unit
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand
Hinge
Assembly
D1 4(S-1), 4(S-2) ---
[2]
Stand Base
Assembly
D1 --------------- ---
[3] Rear Cover D1 5(S-3), 6(S-4) ---
[4]
Power
Supply
CBA
D2
D5
4(S-5), CN501,
CN601, CN1001
---
[5]
Digital Main
CBA Unit
D2
D5
4(S-6), CN3013
*2
,
CN3101
*2
, CN3105
*1
,
CN3801, CN3906
*1
,
Jack Holder
---
[6] Speaker D3 --------------- ---
[7]
Bottom
Cover L
D3 2(S-7), (S-8) ---
[8]
Bottom
Cover R
D3
2(S-9), (S-10),
Function Knob
*1
[9]
Function
CBA Unit
D3
D5
CN4001 *1
[10]
Stand
Bracket
D3 4(S-11) ---
[11]
LCD Panel
Assembly
D3 --------------- *1
[12]
T- C O N
CBA Unit
D4
4(S-12), 2(S-13)
*3
,
FFC Cable,
T-CON Shield
*2
[13]
IR Sensor
CBA Unit
D4 Sensor Plate *1
[14]
Front
Cabinet
D4
11(S-14),
Decoration Plate
*1
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)