To Next PageTo Next Page
Need help?Do you have a question about the Philips 47PFL6008S/60 and is the answer not in the manual?
General| Screen Size | 47 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Type | LED |
| Smart TV | Yes |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Wi-Fi | Yes |
| Ethernet | Yes |
| 3D | Yes |
| Ambilight | Yes |
| Audio Output | 20 W |
| Digital TV Tuner | DVB-T/C/S/S2 |
Safety regulations to follow during repair, including isolation transformer use.
Procedure for removing the assembly or panel from the set.
General instructions for re-assembling the set in reverse order.
Overview of Service Default Mode (SDM), Service Alignment Mode (SAM), and Customer Service Mode (CSM).
Pre-defined settings for measurement results and overriding SW protections.
Mode for alignments and option number configuration.
Read-only mode for customer support to diagnose set status.
Diagrams documenting supplies and states during TV start-up.
Error code buffer mechanism, how errors are logged and removed.
Methods to clear the error buffer via SAM menu or auto-reset.
Table listing error codes, monitored by, device, and defective board.
Diagnostic procedure using blinking LEDs to indicate errors.
Methods to activate CSM or SDM to display errors via blinking LED.
Information about software protections and fault conditions.
Protections related to supplies and safety check mechanisms.
Guidelines for fault finding and general repair tips.
Input power, voltage splitting via fuses, and regulator functions.
Input power, voltage splitting via fuses, and regulator functions.
Procedure for running the background memory test and interpreting results.
Checking LED drivers on PSL(S) for no picture/backlight issues.
Checking and changing display option code in SAM for correct performance.
Detailed instructions for replacing the SSB, including software and configuration.
Table detailing actions, advice, and remarks for SSB replacement.
Notes before starting SSB replacement, including software preparation.
Procedures for upgrading the TV's software, both automatic and manual.
Process for automatic software upgrade in normal conditions.
Method to upgrade Standby software using a USB stick.
Prerequisites for electrical adjustments, including power supply and warm-up.
Procedure for white point alignment using picture settings and colour analyser.
Picture settings for white point alignment: Brightness, Colour, Light Sensor.
Picture settings for Pixel Precise HD: Dynamic Contrast, Backlight, Colour Enhancement.
Alignment procedure using a 100% white screen and specific values.
Procedure for white point alignment using a calibrated color analyser.
Configuration of optional settings and parameters via SAM or option codes.
Crucial step for repaired SSB: reset NVM, set service type, and production code.
Setting type number and production code after SSB replacement.
Correct ordering number (12nc) for SSB is located on the sticker.
Overview of SAM modes: Hardware Info, Operation hours, Errors, Alignment.
Overview of SAM modes: Hardware Info, Operation hours, Errors, Alignment.
NVM editor for re-keying type number and production code.
Description of the power supply units and components.
All power supplies are black boxes; order new board if defective.
Block diagram and pinning information for DVBT2 channel decoder IC.
Overall block diagram of the TV system, showing major components.
Diagram illustrating the TV's power supply lines and regulators.
Circuit diagrams and PWB layouts for the 310431366124 SSB.
Circuit diagram for the Fusion supply unit (B01B).
Circuit diagram for the LNB supply unit (B01C).
Circuit diagram for the internal USB connections (B01D).
Circuit diagram for the Hybrid T/C tuner (B02A).
Circuit diagram and diversity matrix for the satellite tuner (B02B).
Circuit diagram for the DVBT2 channel decoder (B02C).
Circuit diagram for the DVBS/S2 channel decoder (B02D).
Circuit diagram for the Fusion processor and its connections (B03A).
Circuit diagram for the Fusion Umac controller (B03B).
Circuit diagram for the Umac 1 DDR3 memory interface (B03C).
Circuit diagram for the Umac 0 DDR3 memory interface (B03D).
Circuit diagram for the Fusion processor and its I/O connections (B03E).
Circuit diagram for the Fusion power supply unit (B03F).
Circuit diagram for the control, temperature sensor, and service functions (B04A).
Circuit diagram for the V-by-One output signals (B04B).
Circuit diagram for the output Vdisp signals (B04C).
Circuit diagram for audio and video connections (B04E).
Circuit diagram for the Fusion supply unit (B04F).
Circuit diagram for the backlight microcontroller (B04G).
Circuit diagram for the eMMC storage module (B04H).
Circuit diagram for the sensor board and Ambilight control (B05C).
Circuit diagram for control, sensor, and service functions (B06L).
Circuit diagram for the Fusion power supply unit (B03F).
Circuit diagram for the control, temperature sensor, and service functions (B04A).
Circuit diagram for the Fusion supply unit (B04F).
Circuit diagram for the sensor board and Ambilight control (B05C).
Circuit diagram for control, sensor, and service functions (B06L).
Circuit diagram for the Fusion power supply unit (B03F).
Circuit diagram for the control, temperature sensor, and service functions (B04A).
Circuit diagram for the Fusion supply unit (B04F).
Circuit diagram for the sensor board and Ambilight control (B05C).
Circuit diagram for control, sensor, and service functions (B06L).
Circuit diagrams and PWB layouts for the C 310431366652 Amplifier panel.
Circuit diagrams and PWB layouts for the QFHD sensor board (J).
Circuit diagrams and PWB layouts for the Wireless LAN USB module, light sensor, IR/LED.
Circuit diagram illustrating the power supply circuits (J06).
Circuit diagrams and PWB layouts for the Sensor Module.
Circuit diagrams and PWB layouts for the AmbiLight (310431366033).
Circuit diagrams and PWB layouts for the AmbiLight (310431366043).
Circuit diagrams and PWB layouts for the AmbiLight (310431366053).
Circuit diagrams and PWB layouts for the AmbiLight (310431366063).
Circuit diagrams and PWB layouts for the AmbiLight (310431366171).
Circuit diagrams and PWB layouts for the AmbiLight (310431366302).
Circuit diagrams and PWB layouts for the AmbiLight (310431366372).
Circuit diagrams and PWB layouts for the AmbiLight (310431366363).
Circuit diagrams and PWB layouts for the AmbiLight (310431366372).
Circuit diagrams and PWB layouts for the AmbiLight (310431366033).
