Philips 50PFL4909/F7 - Cabinet Disassembly Instructions; Screw Torque Specification; Disassembly Flowchart; Disassembly Method

4-1 PL14.24-A_DC
CABINET DISASSEMBLY INSTRUCTIONS
Screw Torque Specification
* For reference
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access
to items to be serviced. When reassembling, follow
the steps in reverse order. Bend, route and dress
the cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following “Reference Notes in the
Tabl e.”
Ref.
No.
Part
Number
Part Name
Tightening
Torque
L10 GCHP3120
SCREW F-PAN BLACK_NI
+P-TITE M3X12.0
5.2±0.9lb·in
L23 GBJS3060
SCREW BIND 3CHROM
+S-TITE M3X6.0
L28 GCHS3080
SCREW F-PAN BLACK_NI
+S-TITE M3X8.0
L45 FPH34100
SEMS-SW PAN BLACK_NI
+ M4X10.0
SSK1 1ESA34506
STAND SCREW KIT
(SEMS-SW PAN BLACK_NI
+ M4X12.0)
(approx.
8.7±0.9lb·in)
*
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand Base
Assembly
D1 8(S-1), Stand Neck ---
[2]
Rear
Cabinet R
D1
10(S-2), 6(S-3),
2(S-4), 10(L-1)
---
[3]
Rear
Cabinet L
D1
6(S-5), 4(S-6),
2(S-7), 8(L-2)
---
[4]
Power
Supply
CBA
D2
D5
5(S-8), CN501,
CN601, CN1101,
CN1301
---
[5] Digital Main
CBA Unit
[4] Power Supply
CBA
[1] Stand Base
Assembly
[3] Rear
Cabinet L
[6] Stand Bracket
[7] Speaker
[10] IR Sensor
CBA Unit
[11] LCD Panel
Assembly
[9] Function
CBA Unit
[8] Speaker
Holder
[2] Rear
Cabinet R
[5]
Digital Main
CBA Unit
D2
D5
4(S-9), CN3105,
CN3801, CN3906,
Jack Holder
---
[6]
Stand
Bracket
D3 --------------- ---
[7] Speaker D3 ---------------- ---
[8]
Speaker
Holder
D3 2(S-10) ---
[9]
Function
CBA Unit
D3
D5
CN4051, Function
Knob, Knob Frame,
Hook
2
[10]
IR Sensor
CBA Unit
D3
D5
Sensor Shield, Hook 2
[11]
LCD Panel
Assembly
D4
Decoration Plate,
Leading Edge Cover,
LED Lens, Hook
1
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal Note