Settings > Display &
Sound > Ambilight > Ambisleep > Sound.
Select the nature sound you want to use during
Ambisleep.
The available nature sounds are:
• Campfire
• Rain
• Rainforest
• Tropical beach
• Waterfall
• Silent
Lounge Light Mode
The lounge light mode of your TV allows you to
switch on the Ambilight when the TV is in standby. So
you can light up your room with Ambilight.
Enable lounge light mode
Settings > Display & Sound > Ambilight >
Lounge light > Enable on standby.
Switch on to allow lounge light mode to be activated
when TV is on standby.
After putting your TV on standby, if you want to
switch on the Ambilight lounge light, follow these
steps:
1 - Press the AMBILIGHT key on the remote control
to activate the Ambilight lounge light.
2 - Press the navigation keys (left) or (right) to
change different light effects.
3 - Press the navigation keys (up) or (down)
to adjust the brightness.
4 - To switch off the Ambilight lounge light, press
the AMBILIGHT key again.
Duration
Settings > Display &
Sound > Ambilight > Lounge light > Duration.
Set the duration (in minutes) of Lounge light mode.
Advanced Ambilight Settings
Brightness
Settings > Display &
Sound > Ambilight > Advanced > Brightness.
Press the Arrow/navigation keys to set the level of
Ambilight brightness.
Saturation
Settings > Display &
Sound > Ambilight > Advanced > Saturation.
Press the Arrow/navigation keys to set the level of
Ambilight saturation.
Neutralize the influence of a colored wall on the
Ambilight colors
Settings > Display &
Sound > Ambilight > Advanced > Wall color.
Select the color of the wall behind the TV and the TV
will modify the Ambilight colors to appear as they are
intended.
Set Ambilight to switch off immediately or slowly
fade out when you switch off the TV
Settings > Display &
Sound > Ambilight > Advanced > TV switch off >
Fade out to off/Immediate switch off.
Warm white tuning
Settings > Display &
Sound > Ambilight > Advanced > Warm white
tuning.
The Warm white tuning tunes and locks your
preferred color for Ambilight. When Ambilight style >
Follow color > Warm white is unlocked, you can tune
and lock white color variations of Ambilight.
Ambilight Extension
Philips Wireless Home Speakers
Note: Before starting the setup, make sure the TV and
your Philips Wireless Home Speakers are connected
to the same Wi-Fi network.
With Ambilight extension, you can set up your Philips
Wireless Home Speakers to follow the colors of
Ambilight. Before starting the setup, make sure your
Philips Wireless Home Speakers are turned on and
connected to the same Wi-Fi network as the TV.
Please give some time for the speakers to be ready if
you just turned them on before starting.
Press and hold the LED link button on the speaker for
3 seconds to start linking. If you have more than 1
speaker, repeat the same action for each speaker and
press the BACK key when you are done. The LED link
button is located on the Philips Wireless Home
Speakers.
39
To Next Page
Loading...
