Switch on to adjust the picture settings automatically
to the lighting conditions of the room.
Backlight Contrast
Settings > Display & Sound > Picture
> Contrast > Brightness > Backlight contrast.
Adjust the contrast value of the picture. You can
decrease contrast value to reduce power
consumption.
Contrast Modes
Settings > Display & Sound > Picture
> Contrast > Brightness > Contrast mode.
Select Normal, Optimized for picture, or Optimized
for energy savings to set the TV automatically
reduces the contrast, for best power consumption or
for best picture experience, or select Off to switch
off the adjustment.
Video Level
Settings > Display & Sound > Picture
> Contrast > Brightness > Video level.
Adjust the video contrast level.
Dark Details
Gamma
Settings > Display & Sound > Picture
> Contrast > Dark details > Gamma.
To set a non-linear setting for picture luminance and
contrast.
Note: Not available on some models when Ambient
dark detail optimization or Dark detail optimization is
set to On.
Black Level
Settings > Display & Sound > Picture
> Contrast > Dark details > Black level.
To set the black level of picture.
Note: Setting of black level much away from
reference value (50) may result lower contrast (dark
detail disappear or black picture become grey).
Contrast Enhancement
Dynamic Enhancement Level
Settings > Display & Sound > Picture
> Contrast > Contrast enhancement > Dynamic
enhancement level.
Select Off, Maximum, Medium, or Minimum to set
the level at which the TV automatically enhances the
details in the dark, middle and light areas of the
picture.
Note: Not available when HDR signal is detected. Not
available in Monitor mode.
HDR Control
HDR Tone Mapping
Settings > Display & Sound > Picture
> Contrast > HDR control > HDR tone mapping.
Set the method used in HDR tone mapping
processing. Off, Off/HGiG is to disable TV internal
tone mapping or follow HGiG (HDR Gaming Interest
Group) gaming HDR standard to matching gaming
device. Standard is to follow HDR standard metadata.
Note: Available when HDR10 or HDR10+ signal
detected.
HDR Effect Settings
Settings > Display & Sound > Picture
> Contrast > HDR control > HDR10 effect / HDR10+
effect / HLG effect.
When HDR10 / HDR10+ / HLG signal detected and
HDR tone mapping is not set to Off or Off/HGiG, you
can adjust the HDR effect level to Minimum, Medium
or Maximum for each type of HDR contents.
Colour
Settings > Display & Sound > Picture > Colour.
Saturation
Settings > Display & Sound > Picture > Colour >
Saturation.
To adjust the value of saturation for the colours.
Note: not available when picture style is Monitor or
HDR Monitor.
Adjust the colour enhancement
40
To Next Page
Loading...
Need help?
General