setting is 60ms.
Dolby Atmos Notification
(Home) > Settings > Sound > Dolby Atmos
Notification
Switch On or Off the Dolby Atmos notification when
Dolby Atmos content begins to play on your TV.
Channels
HbbTV Settings - Hybrid Broadcast Broadband TV
(Home) > Settings > Channels > HbbTV
settings > HbbTV
If a TV Channel offers HbbTV services, you must first
switch on HbbTV in the TV settings to access to these
advanced services, e.g. video on-demand and catch-
up TV services.
(Home) > Settings > Channels > HbbTV
settings > HbbTV tracking
Switch the tracking of HbbTV browsing behaviour on
or off. Switching off will inform the HbbTV services not
to track your browsing behaviour.
(Home) > Settings > Channels > HbbTV
settings > HbbTV cookies
Switch the storage of third-party cookies, site data
and cache from HbbTV services on or off.
(Home) > Settings > Channels > HbbTV
settings > HbbTV Device ID reset
You can reset your TV unique device identifier. A new
identifier will be created.
(Home) > Settings > Channels > HbbTV
settings > Clear approved app listing
Allow you to clear the list of HbbTV applications that
you have allowed to be launched on the TV.
CAM Settings
(Home) > Settings > Channels > CAM Operator
profile
When CAM profile installation is done, select to
enable or disable CAM Operator profile UI pop up
message.
(Home) > Settings > Channels > CAM profile
name
When CAM Operator profile is enabled, select to
display the profile name of current connected CAM
card.
General Settings
Connection Related Settings
USB Keyboard Settings
(Home) > Settings > General settings > USB
keyboard settings
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection.
Mouse Settings
(Home) > Settings > General settings > Mouse
settings
Adjust the motion speed of the USB mouse.
HDMI-CEC Connection - EasyLink
Connect HDMI CEC-compatible devices to your TV,
you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched on on
the TV and the connected device.
Switch on EasyLink
(Home) > Settings > General
settings > EasyLink > EasyLink > On
Operate HDMI CEC-compatible devices with TV
remote control
36
To Next Page
Loading...
Need help?
General
