Philips 6423LC - Trimming; Cleaning

Trimming
To groom sideburns and moustache:
1 Turn razor to ON (1) position.
C
2 Push up Trimmer Slide Switch.
The Trimmer can be activated while the razor is
running.
C
3 Hold Trimmer as shown and move in
downward strokes with gentle pressure.
4 Close Trimmer by sliding Trimmer switch
down.
5 Turn razor to OFF (O) position.
Cleaning
Once a week: Razor
◗ Regular cleaning guarantees better shaving
results.
Always turn razor off, unplug from outlet and
remove cord from razor before cleaning.
C
1 Clean the top of the razor with the
supplied brush.
C
2 Press the Razor Head Release Button and
remove Razor Head Assembly from the
razor unit.
C
3 Brush out hairs from the inside of Razor
Head Assembly and hair chamber.
C
4 Replace the Razor Head Assembly back on
razor.
Every Two Months: Razor Heads
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor to OFF (O) position and
disconnect from outlet.
C
2 Press the Razor Head Release Button and
remove Razor Head Assembly from the
razor unit.
C
3 Brush the inside of the razor housing.
4 Turn Razor Head Assembly over so that
underside is exposed.
C
5 Turn wheel of frame counterclockwise.
6 Remove the frame and brush clean.
ENGLISH 13ENGLISH12