QUICK USE GUIDE
12nc: 3139 246 15902
DVD RECORDER 645
1 Remove the antenna cable plug from your TV (or Satellite
Receiver/Cable Box). Connect it to the ANTENNA input
socket at the back of the DVD recorder.
2 Use the supplied antenna cable to connect the DVD
recorder’s TV output socket to the antenna input socket at
the back of your TV set
3 Use the supplied scart cable to connect the DVD recorder’s
EXT 1 TO TV-I/O socket to the SCART socket at the back
of your TV set.
4 Connect the power cable of the DVD recorder’s ~ MAINS
to the power supply.
Helpful Hints:
If your TV does not have the above-mentioned
connectors, please refer to the user manual for more
information on others possible connection to your
TV set.
Prepare the remote control
1 Press STANDBY-ON 2 on the DVD recorder to switch
it on.
2 Switch on the TV set and select the correct video in channel,
the First Installation menu appears on the TV.
NO PICTURE! Press the TV/AV button or CHANNEL 3 4
button on the TV to select the correct video in channel, for
example, 'EXT', '0', or 'AV'.
3 Press 3 4 to select an item in the menu.
Press 2 to access the selected item’s options.
Press 1 to confirm your selection.
When you complete, select { Done } in the menu and press
OK to continue.
4 { Language and Country } menu appears.
{ Language } – select on-screen display language.
{ Country } – select country of your residence.
5 { TV Format } menu appears.
{ TV Format } – select TV screen display.
6 { Channel Search } menu appears.
Press OK to start automatic TV channel search.
Once the TV channel search is completed, the total number of
channels found is displayed.
7 { Time and Date } menu appears.
If the time and date shown on the TV are not correct,
press 2 to enter the respective time/date field. Press 3 4 to
change the first digit and press 2 to go to the next digit field.
Once complete, press OK to confirm.
8 Press 4 to select { Done } and press OK to save the changes.
➜ The first installation is now complete.
The DVD recorder is ready for use!
See next page for basic recording and playback.
Start first installation Connect DVD recorder
1 3
1
3
2
2
4
2
3
5
6
1
7
1
2
3
4
8
DVD recorder back panel
ANTENNA/
CABLE SIGNAL
1_xRV645 QUG_Eng_00_15902 11/07/2005, 03:21 PM1
All manuals and user guides at all-guidesbox.com
all-guidesbox.com
To Next Page
Need help?
General
