Philips 7000 series - Page 48

47
English
Charging in the charging stand
(specic models only)
1 Make sure the appliance is switched o.
2 Put the small plug in the charging stand
and put the supply unit in the wall socket.
3 Place the appliance in the charging stand.
Specic models only: The light ring on the
bottom of the charging stand lights up
and rotates quickly.
- After approximately 5 minutes, the
light ring rotates slower. The battery
now contains enough energy for one
shave.
- As the appliance continues to charge,
the light ring becomes brighter and
rotates slower.
- When the appliance is fully charged,
the light ring lights up fully and stops
rotating.
4 After charging, remove the supply unit
from the wall socket and pull the small
plug out of the charging stand.
'Unplug for use' symbol
The 'unplug for use' symbol ashes to
remind you to disconnect the appliance from
the wall socket and remove the small plug
from the appliance before you switch it on.