59
English
5 Clean the cutter and guard under the tap.
6 Shake o excess water.
7 Put the shaving heads back into the
shaving unit. For detailed instructions, see
'How do I replace the shaving heads?.'
8 Insert the hinge of the shaving head
holder into the slot in the top of the
shaving unit and close the shaving unit.
Cleaning the pop-up trimmer
Clean the trimmer after each use to prevent
clogging and damage.
Never dry the trimmer teeth with a towel or
tissue, as this may damage the trimmer teeth.
1 Make sure that the appliance is switched
o and disconnected from the wall
socket.
2 Push the trimmer release slide down to
open the pop-up trimmer.
3 Switch on the appliance and rinse the
pop-up trimmer with warm water.
4 After cleaning, switch o the appliance.
5 Carefully shake o excess water and let
the pop-up trimmer air dry.
6 Close the trimmer.
To Next Page
Loading...
