Philips 8FF3WMI Firmware Upgrade Instructions

PhotoFrame Firmware Upgrade Instructions
Applicable models 8FF3WMI
Firmware version 1.01
Release date September 19, 2008
Release notes
Please follow the steps below to upgrade the PhotoFrame firmware.
1 Format a SD (Secure Digital) card
2 Copy all files from the ‘Firmware’ folder into the root folder of the storage device
(The root folder is the ‘highest’ folder in hierarchy, for example F:\)
3 Insert SD into PhotoFrame
4 Go to the Main Menu, [New Update] is highlighted
5 Press OK to initiate the upgrade

Philips 8FF3WMI Specifications

Picture/Display

viewing angle	130º (H)/110º (V)
lifetime to 50% brightness	20, 000 hr
aspect ratio	4:3
panel resolution	800 x 600
brightness	250 cd/m²
contrast ratio (typical)	300:1

Storage Media

built-in memory capacity	512 MB
memory card types	Compact Flash type I, Secure Digital (SD), Secure Digital (SDHC), Multimedia Card, xD card, Memory Stick, Memory Stick Pro, Memory Stick Duo, Memory Stick Pro Duo
USB	USB flash drive

Power

power supply	100-240 VAC, 50/60 Hz
power source	DC output 9 V, 2 A
power consumption (system on)	5.09 W

Operating Environment

temperature range (operation)	0°C to 40°C
temperature range (storage)	-10°C to 60°C
regulatory approvals	CE, GOST, Switzerland, UL

Dimensions and Weight

set dimensions with stand	222.6 x 182.2 x 33.2 mm
weight	0.34 kg
packaging dimensions	27.8 x 22.9 x 10.7 cm