ENGLISH 21
C 6 Open Razor Head assembly again and
leave open to air dry.
NO
TE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.
C 7 If the shaving unit becomes detached from
the razor,you can easily reattach it.
8 You may also clean the hair chamber
without water by using the supplied brush.
Once A Month: Razor Heads
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor OFF,remove the charging plug
from the outlet and cord from the razor
or charging stand.
C 2 Press the razor head release button to
open the razor head assembly.
C 3 Turn the wheel counterclockwise (1) and
remove the retaining frame (2).
ENGLISH20
Cleaning: Razor Heads
The easiest and most hygienic way to clean the
razor heads is to rinse them after each use or
at least once a week with hot water: Water
from the tap should be on a hot setting, BUT
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse razor in water.
1 Always turn razor OFF,unplug from outlet
and remove cord from razor or charging
stand before cleaning.
C 2 Press the Razor Head Release Button,flip
open the Razor Head Assembly.
C 3 Clean inside razor heads and hair chamber
by running under hot water.
C 4 Clean outside of Razor Head Assembly by
running under hot water.
5 Close the Razor Head Assembly and shake
off excess water.
To Next Page
Loading...
