Philips AC1715 - Page 4

2 EN
1
Notes
1 Please scan the QR code to read the full detailed User Manual online to better know about
this product.
2 Make sure the purier is unplugged from the electrical outlet before installing the lter.
3 If the purier stays connected to the electrical outlet after turning OFF, the air purier will
operate under the previous settings when turned ON again.
4 Follow the app onscreen instructions to connect the air purier to your network.
5 The appliance display PM2.5 level by default.
6 The color of the air quality light is determined by the highest risk index among PM2.5 and IAI
readings. PM2.5 refers to airborne particle pollutants smaller than 2.5 micrometers, IAI refers
to the level of indoor air allergen.
7 All lights will be o or dim to match with the ambient light.
8 Clean the particle sensor with a damp cotton swab.
9 You can reset your Wi-Fi connection when your network or smartphone has been replaced.
10 You can also replace the lter before lter replacement alert displays on the screen. After
replacing a lter, you need to reset the lter lifetime counter manually.
1
Troubleshooting
Please check the troubleshooting at www.philips.com/support when you encounter problems with
the appliance. If you are unable to solve the problem with the information, contact the Consumer Care
Center in your country.