Philips AC4072 - Using the Appliance; Air Quality Indication

7
English
Using the appliance
1 Put the plug in the wall socket
 Alllightsgoontwiceandyouhearabeep.Thenthelightsgoout
again.
2 Presstheon/offbuttontoswitchontheappliance.
 Thepower-onlight,theAUTOlight,andtheAIRQUALITYlighton
thecontrolpanelgoon.
 Theairqualitylightringshowsthequalityoftheair.
Air quality indication
Colour Airquality
Blue Very good
Deep purple Good
Purple Fair
Red Bad
To switch off the air quality light ring, press the AIR QUALITY button.
Note: The air quality light ring automatically goes on when the appliance is
switched on.
 TheapplianceautomaticallystartsoperatingintheAUTOmode.
To switch off the appliance, press the on/off button again and unplug the
appliance.
Note: When the humidity level in the room is very high, it is possible that
condensation develops on the air quality sensor. As a result, the AIR QUALITY
light on the control panel and the air quality light ring may indicate that the
air quality is bad even though the air quality is good. In this case, the auto