Philips AD440 - 4 Play; Play from iPod;iPhone; Play from an external audio device; Charge the iPod;iPhone

7 EN
4 Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod classic
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
Listen to the iPod/iPhone
1 Place an iPod/iPhone in the dock.
2 Play audio on the iPod/iPhone.
3 To adjust volume, press VOL +/-.
4 To mute, press .
5 To play or pause, press .
To remove the iPod/iPhone:
Pull the iPod/iPhone out of the dock.
Play from an external audio
device
Note
•
Make sure that no iPod/iPhone is docked in the speaker.
1 ConnectanMP3linkcable(notsupplied)
to:
• the MP3 LINK socket at the back of
the docking speaker.
• the headphone socket on an external
device.
2 Press to play music on the device (see
thedevice'susermanual).
Charge the iPod/iPhone
When the docking speaker is connected to
power, the docked iPod/iPhone begins to
charge automatically.