Philips AJ3123 - Other Features; Set Alarm Timer; Select Alarm Source; Activate;Deactivate Alarm Timer

6 EN
5 Other features
Set alarm timer
Set alarm
Note
• You can only set the alarm in standby mode.
• Make sure that you have set the clock correctly.
Followtheillustrationtosettherstalarm.
• AL1:settherstalarm.
• AL2: set the second alarm.
Tip
• The clock radio exits alarm setting mode when being
idle for 10 seconds.
MIN
HOUR
1 2
3 4
2 sec
g
Select alarm source
You can select FM radio or buzzer as the alarm
source.
» The corresponding alarm icon lights up.
Note
• If FM radio is selected as alarm source, when alarm
sounds, volume rises gradually. You cannot adjust the
alarm volume manually.
• If Buzzer is selected as alarm source, the alarm volume
will be at default level and cannot be adjusted.
Activate/deactivate alarm timer
Press AL1 or AL2 repeatedly to activate or
deactivate the alarm timer.
» If the alarm timer is deactivated, the
alarm indicator turns off.
» The alarm repeats ringing for the next
day.
Snooze the alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.
h
AL1FM
AL 1