For fi rst-time use:
Remove the protective tab to activate the battery. B
To replace the battery: C
Connect power D
Caution
Risk of product damage! Ensure that the power voltage corresponds •
to the voltage printed on the back or underside of the clock radio.
Risk of electric shock! When you unplug the AC adapter, always
•
pull the plug from the socket. Never pull the cord.
Set clock
1 In standby mode, press and hold SET TIME for two
seconds.
The current time is displayed. »
The hour and minute digits begin to blink. »
2 Press HR+/- and MIN+/- repeatedly to set hour and minute.
3 Press SET TIME again to confi rm.
» [12H] or [24H] is displayed.
4 Press HR+/- (or MIN+/- ) to select 12/24 hour format.
5 Press SET TIME to confi rm.
Note
When iPhone/iPod is connected, the clock radio synchronizes •
time with iPhone/iPod automatically.
To Next Page
Loading...
