Philips AJ3950 - Technical Specifications; Service Tools

PCS 107 249
2-1
SERVICE TOOLS
Audio signal disc SBC 429.......................................................................4822 397 30184
Playability test disc SBC 444
...................................................................4822 397 30245
Test disc 5 (disc without errors ) +
Test disc 5A (disc with dropout errors, black spots and fingerprints)
SBC 426/426A.....................................................................4822 397 30096
Burn in test disc (65 min. 1kHz signal at -30 dB level without “pause”)
.....4822 397 30155
Universal test cassette Fe SBC 420........................................................4822 397 30071
TECHNICAL SPECIFICATIONS
GENERAL
Mains voltage -/00 : 220 - 230 V
-/17 : 120v
Mains frequency -/00 : 50 Hz
-/17 : 60 Hz
Battery mains : 4.5 V
Power consumption max. : 17 W
standby : 3.4 W
Dimension (W x H x D) : 170 x 190 x 190 mm
Weight : 2.1 Kg
AMPLIFIER
Output power mains : 2 x 0.8 W
Speaker impedance : 2 x 8 ohm
Frequency response : 100 Hz - 10 kHz (±4dB)
TUNER - FM SECTION
Tuning range : 87.5 - 108 MHz
IF frequency : 10.7 MHz ± 0.3 MHz
Sensitivity : 3 µV at 26dB S/N
Selectivity : 24 dB at 300kHz
IF rejection : 55 dB
Image rejection : 26 dB
TUNER - AM SECTION
Tuning range MW : 526.5 – 1606.5 kHz
-/17 : 520 - 1722 kHz
IF frequency : 468 kHz ± 3 kHz
Sensitivity MW : 69 dBµV/m at 26dB S/N
Selectivity M W : 20 dB
IF rejection MW : 28 dB
Image rejection MW : 32 dB
COMPACT DISC
Frequency response : 125 Hz - 10 kHz
S/N ratio : 60 dB
Channel difference 1 kHz : 2 dB
Channel crosstalk 1 kHz : 40 dB
Laser wavelength : 780 ± 20 nm
Laser light power : < 0.5 mW