Philips AJB1002 - Set sleep timer; Listen to external audio device

Set sleep timer
The unit can switch to standby mode automatically after a period.
1 Press SLEEP repeatedly to select time period.
»
is displayed.
The volume decreases gradually in the last 5 minutes. »
To turn off the sleep timer:
1 Press SLEEP repeatedly until [Sleep off] is displayed.
»
disappears.
Adjust display brightness
1 Press REPEAT ALARM/BRIGHTNESS CONTROL repeatedly
to select different brightness levels of the display:
Full brightness•
Half brightness•
Backlight off•
Listen to external audio device
With this unit, you can enjoy audio from an external device.
1 Connect the supplied MP3 link cable to:
the • MP3-LINK socket on the back of this unit
the output socket of the external device.•
2 Press SOURCE repeatedly to select MP3-LINK.
» [MP3-Link] is displayed.
3 Press - VOLUME + repeatedly to adjust volume.