EasyManua.ls Logo

Philips AT928 - Page 22

Philips AT928
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If the shaver is subjected to a major change -
in temperature, pressure or humidity, let
it acclimatise for 30 minutes before you use it.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable -
standards and regulations regarding exposure to
electromagnetic elds (EMF).
General
- This symbol means: Suitable to be used in the
shower.
It is allowed to use this appliance close to a -
bathtub, shower or other containers lled with
water.
The adapter is equipped with an automatic -
voltage selector and is suitable for mains voltages
ranging from 100 to 240 volts.
The adapter transforms 100-240 volts to a safe -
low voltage of less than 24 volts.
Charging
Note: The shaver cannot be used directly from the
mains.
It takes approx. 1 hour to fully charge the shaver.
When you charge the shaver for the rst time or
after a long period of disuse, let it charge until the
charging light lights up continuously.
A fully charged shaver provides up to 50 minutes of
shaving time.
The shaving time may be less than 50 minutes as
a result of your shaving behaviour, your cleaning
habits or your beard type.
ENGLISH
21
AT928_EN_A6_CS3.indd 21 13.5.21 1:53:21 PM

Related product manuals