Need help?Do you have a question about the Philips Avent SCF291 and is the answer not in the manual?
Details the components of the SCF291 and SCF293 sterilizer models, including diagrams and part labels.
Critical safety warnings covering electrical hazards, hot surfaces, supervision, and proper usage to prevent injury.
Important cautions regarding hot steam, handling, accessory use, and intended use to ensure user safety.
Statement confirming the appliance adheres to standards and regulations for electromagnetic field exposure.
Explains the standard sterilization cycle, its duration, and the required water volume for baby items.
Describes the combined sterilize and dry function for SCF293, including total cycle time.
Details the drying cycle specifically for SCF293, including its duration and water requirements.
Provides essential tips on water usage, cleaning components, filter maintenance, and descaling frequency.
Step-by-step guide for initial setup, assembly, and starting the first sterilization cycle.
Instructions for cooling down, safely removing items, and initial cleaning after the sterilization process.
Guidance on thoroughly cleaning items like bottles and accessories before sterilization.
Illustrates different ways to assemble the sterilizer using baskets for various item sizes and quantities.
Detailed instructions for filling water, assembling, operating, and completing the sterilization cycle for both models.
Steps for safely removing items, cooling, unplugging, and cleaning the sterilizer after use.
Guide to setting up and running the Auto mode, which combines sterilization and drying for SCF293.
Instructions for removing items, cooling, and cleaning after the Auto mode cycle is complete.
Detailed steps for using the drying function, including preparation, operation, and item removal.
Instructions for cleaning the base, baskets, and lid with appropriate cleaning agents and methods.
Procedure for detaching, cleaning, drying, and reattaching the filter to maintain its functionality.
Instructions for removing limescale using vinegar or citric acid and subsequent cleaning steps.
Rinsing the appliance and its parts thoroughly to remove any residual descaling solution.
Solutions for descaling frequency, short sterilizing times, and water on the heating plate.
Troubleshooting steps for burning smells, burnt marks, and items remaining wet after drying.
Details the components of the SCF291 and SCF293 sterilizer models, including diagrams and part labels.
Critical safety warnings covering electrical hazards, hot surfaces, supervision, and proper usage to prevent injury.
Important cautions regarding hot steam, handling, accessory use, and intended use to ensure user safety.
Statement confirming the appliance adheres to standards and regulations for electromagnetic field exposure.
Explains the standard sterilization cycle, its duration, and the required water volume for baby items.
Describes the combined sterilize and dry function for SCF293, including total cycle time.
Details the drying cycle specifically for SCF293, including its duration and water requirements.
Provides essential tips on water usage, cleaning components, filter maintenance, and descaling frequency.
Step-by-step guide for initial setup, assembly, and starting the first sterilization cycle.
Instructions for cooling down, safely removing items, and initial cleaning after the sterilization process.
Guidance on thoroughly cleaning items like bottles and accessories before sterilization.
Illustrates different ways to assemble the sterilizer using baskets for various item sizes and quantities.
Detailed instructions for filling water, assembling, operating, and completing the sterilization cycle for both models.
Steps for safely removing items, cooling, unplugging, and cleaning the sterilizer after use.
Guide to setting up and running the Auto mode, which combines sterilization and drying for SCF293.
Instructions for removing items, cooling, and cleaning after the Auto mode cycle is complete.
Detailed steps for using the drying function, including preparation, operation, and item removal.
Instructions for cleaning the base, baskets, and lid with appropriate cleaning agents and methods.
Procedure for detaching, cleaning, drying, and reattaching the filter to maintain its functionality.
Instructions for removing limescale using vinegar or citric acid and subsequent cleaning steps.
Rinsing the appliance and its parts thoroughly to remove any residual descaling solution.
Solutions for descaling frequency, short sterilizing times, and water on the heating plate.
Troubleshooting steps for burning smells, burnt marks, and items remaining wet after drying.
General| Brand | Philips |
|---|---|
| Model | Avent SCF291 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
