Philips PC-APD PW-1710 - User Manual

LABORATORY MANUAL AND INSTRUCTIONS
Version 1.3
Metallurgical & Materials Engineering
Dr. M.L. Weaver
W.S. Rollings
September 6, 2000
This manual describes operation of the Philips PW-1710 X-ray generator using PC-APD,
techniques for data collection and analysis, and for instrument shutdown. All users should refer
to the proper manuals for detailed information.
IMPORTANT!
DO NOT STORE YOUR DATA ON THE C: OR D: DRIVE OF THE COMPUTER. THE
HARD DRIVE WILL BE PURGED WEEKLY. STORE YOUR DATA ON YOUR OWN
FLOPPY DISK.

Philips PC-APD PW-1710 Specifications

General

Brand	Philips
Model	PC-APD PW-1710
Category	Laboratory Equipment
Language	English

Summary

X-Ray Generator Startup and Configuration

Critical Data Storage Warning

Warning against storing data on the computer's hard drive due to weekly purging.

Turning On the X-Ray Generator

Detailed procedure for powering up the Philips PW-1710 X-ray generator.

System Parameter Configuration

Configuring system parameters like data directories and serial ports.

Diffractometer Parameter Configuration

Setting diffractometer parameters like generator tension, current, and slits.

Scan Parameter Configuration

Defining scan parameters such as step size, start/end angles, and scan speed.

Data Analysis Procedures

Pattern Treatment

Processing collected X-ray diffraction data, including alpha 2 stripping.

Peak Search and Identification

Performing peak searches and identifying sample components using PC-IDENTIFY software.

Score List and Graphics Mode

Viewing analysis results in a score list and graphical display.

X-Ray Generator Shutdown

Turning Off the X-Ray Generator

Procedure for safely shutting down the X-ray generator and associated equipment.