Philips avent scf355 - Defrost Setting

- 13 -
Note
• Philips Avent recommends you feed your baby as soon as possible after the milk is warmed. We
advise not to reheat the milk after it has cooled down again.
• Always check the temperature before you feed your baby.
4
Turn the knob back to the ‘o’ position when the bottle/container is removed
from the bottle warmer�
Using the bottle warmer with defrost setting
1
Put the appliance plug in the wall outlet� Place the bottle or container in the
bottle warmer�
2
Fill the bottle warmer with drinking water up to the level of the milk/baby food in
the bottle/container� In case of large amounts of milk/baby food, the maximum
level of water is approximately 1 cm below the top of the bottle warmer�