Philips AVENT SCF358 - How to Warm Milk

- 9 -
Warm milk
1
Place the bottle in the bottle warmer� Fill with drinking water to the level of
the milk. If you have a large volume of milk, e.g. 210 ml/ 7 oz, ll with water to
approximately 1cm below the top of the bottle warmer.
1 cm
2
Select the desired setting based on the milk volume and press the on / o button
to switch on�
7
210
7oz
210ml
3
The progress indicator ashes gradually to show the progress of milk warming.
4
When the entire progress indicator lights up continuously, the milk is ready for
feeding and the bottle warmer automatically switches to keep warm mode�
5
The bottle warmer switches o automatically after about 60 minutes, including
warming time. The progress indicator turns o.
60 min