6
Installing C-type adaptor
Applicable for faucets other than A or B with a diameter of 15mm-21mm. Please prepare
a slotted screwdriver in advance before installing C-type adaptor.
(1) Whether the inner or the outer seal ring of C-type adaptor is necessary depends on
the dimension of the faucet outlet.
(2) Combine the B-type adaptor with the C-type adaptor.
(3) Adjust and screw the combined adaptors onto faucet.
Installing the device
(1) Unscrew thhousing.
(2) Take the ut from the protective m, and put it in the holder. Put the
housing back.
(3) Anticlockwise turn the attachment nut and attach the device to the faucet, then
release the nut.
C1-1
C1-1
C1-2
C1-2
C1-3
C1-3
B1-1 B1-2
To Next Page
Loading...
