EasyManua.ls Logo

Philips AZ1310 - Specifications; Service Tools

Philips AZ1310
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GENERAL
Mains voltage :
-/00C/05/10
-/00C/05/10
230 V
:
-/01 120/230 V
Mains frequency :
: 50 Hz
:
-/01 : 50 / 60 Hz
Battery mains : 9 V (R14 x 6)
Power consumption :
Dimension (L x D x H) : 360 x
225 x 152 mm
Weight : 2.3 Kg
AMPLIFIER
Output power mains : 2 x 1 W
battery : 2 x 1 W
Speaker impedance : 2 x 8 ohm
Frequency response : 100 Hz - 10 kHz (±2dB)
TUNER - FM SECTION
Tuning range : 87.5 - 108 MHz
IF frequency : 10.7 MHz
Sensitivity : < 22 dBf at 26dB S/N
Selectivity : > 20 dB at ±300kHz
±0.2MHz
IF rejection : > 50 dB
Image rejection : > 20 dB
TUNER - MW SECTION
Tuning range : 520 - 1602 kHz
IF frequency : 450 kHz ± 1 kHz
Sensitivity : < 5000 µV/m at 26dB S/N
Selectivity : 16 dB
:
IF rejection ratio 24 dB
:
Image rejection ratio 28 dB
AUDIO CASSETTE RECORDER
Number of tracks : 1 stereo
Tape speed : 4.76 cm/sec ± 3%
Wow & flutter : < 0.35 % JIS UWTD
Fast wind/rewind C60 : < 130 sec.
< 5 W typ.
Frequency response P/B : 125 - 8000 Hz
S/N ratio : > 36 dB
>
>
>
COMPACT DISC
:
S/N ratio > 50 dB
Channel difference 1 kHz : < 3 dB
Channel crosstalk 1 kHz : > 26 dB
Laser wavelength : 780 ± 20nm
Laser light power : < 0.3 mW
2 - 1
SERVICE TOOLS
Audio signal disc SBC 429.......................................................................4822 397 30184
Playability test disc SBC 444
...................................................................4822 397 30245
Test disc 5 (disc without errors ) +
Test disc 5A (disc with dropout errors, black spots and fingerprints)
SBC 426/426A.....................................................................4822 397 30096
Burn in test disc (65 min. 1kHz signal at -30 dB level without “pause”)
.....4822 397 30155
anti-static table mat
large 1200x650x1.25mm 4822 466 10953
small 600x650x1.25m 4822 466 10958
anti-static wristband
4822 395 10223
connection box (3 press stud connections, 1M) 4822 320 11307
extendible cable (2m, 2M, to connect wristband to connection box) 4822 320 11305
connecting cable (3m, 2M, to connect table mat to connection box) 4822 320 11306
earth cable (1M, to connect any product to mat or to connection box) 4822 320 11308
KIT ESD3 (combining all 6 prior products - small table mat) 4822 310 10671
wristband tester 4822 344 13999
AVAILABLE ESD PROTECTION EQUIPMENT
SPECIFICATIONS

Other manuals for Philips AZ1310

Related product manuals