Philips AZ328 - Turn on; Turn off; Play a CD

7EN
Turn on
Switch the source selector on the main unit to
FM/USB/AUDIO-IN/CD.
» When the source selector is in the
AUDIO-IN/CD position, CD is
displayed.
Switch to standby mode
• The unit switches to standby mode
automatically when there is no audio
detected for over 15 minutes.
• Press to wake up the unit from
standby mode.
Turn off
Switch the source selector on the main unit to
OFF.
4 Play
Play a CD
Note
• You cannot play CDs encoded with copyright
protection technologies.
• When an audio-in cable is plugged, CD/USB playback
stops, and the unit switches to audio in mode
automatically.
You can play commercially available audio CDs:
• CD-Recordables(CD-R)
• CD-Rewritables(CD-RW)
• MP3-CDs
1 Switch the source selector to CD.
2 Open the CD compartment.
3 Insert a CD with the printed side facing up
and close the CD lid gently.
» The total number of tracks displays.
» Your CD sound machine starts to play
automatically.
• To select a track,press / .
• To pause CD play, press .
» [ ]andtracknumberash.
• To resume CD play, press again.
• To stop CD play, press .
CD USB
FM TA PE / OFF
AUDIO IN