Philips AZ783 - Play Audio; Play CD; Play from USB Devices

8EN
3 Close the battery compartment.
Turn on
Press .
» The unit switches to the last selected
source.
Tip
•
To select a source, press SOURCE repeatedly or the
source selection buttons on the remote control.
Turn off
Press again.
» The backlight on the display panel turns off.
4 Play
Play CD
1
Press CD to select the disc source.
2 Press OPEN•CLOSE to open the disc tray.
3 Insert a disc with the printed side facing up,
then close the disc tray.
» Play starts automatically.
Play from USB devices
Note
•
Make sure that the USB device contains playable audio
content.
1 Press USB to select USB source.
2 Insert the USB device into the socket.
» Play starts automatically. If not, press
.