Philips B Series User Manual

8
2. Setting up the monitor
Note
If you turn off your monitor via the
power switch at any given time, all the
USB ports will power OFF.
Warning
USB 2.4Ghz wireless devices, such
as, wireless mouse, keyboard, and
headphones, maybe have interference
by the high-speed signal of USB3.2
Gen2 devices, which may result in
a decreased efficiency of the radio
transmission. Should this happen,
please try the following methods to
help reduce the effects of interference.
• Try to keep USB2.0 receivers away
from USB3.2 Gen2 connection port.
• Use a standard USB extension cable
or USB hub to increase the space
between your wireless receiver and
the USB3.2 Gen2 connection port.
2.2 Operating the monitor
1
Description of the control buttons
7
6
25
4
3
1
Switch monitor’s power
ON and OFF.
Access the OSD menu .
Confirm the OSD
adjustment.
Adjust the OSD menu.
PowerSensor
Change the signal input
source.
Return to previous OSD
level.
SmartImage. There are
multiple selections:
EasyRead, Office, Photo,
Movie, Game, Economy,
LowBlue Mode,Off.
2
Webcam
21 13 2 4
Microphone
IR of Face identification
2.0 Megapixel Webcam
Webcam activity light

Philips B Series Specifications

General

Panel Type	IPS
Resolution	1920 x 1080 (Full HD)
Refresh Rate	60Hz
Connectivity	DisplayPort, HDMI, VGA
Features	LowBlue Mode, Flicker-Free
Brightness	250 cd/m²
Contrast Ratio	1000:1
Viewing Angle	178° (H) / 178° (V)
Input Ports	HDMI, VGA, DisplayPort
VESA Mount	100 x 100 mm