Philips BT2500B/W-00 - Page 16

TECHNICAL SPECIFICATION
1-15
3.2.2 Audio in( Speaker impendence 8 ohm)
Item Nom Limit unit Remark
Output power 3 ±1dB W 10% THD
Input sensivity 250 ±100 mV
Frequency response(63Hz-20Khz) ±1 ±3 dB According acousc spec.
Channel separaon 35 30 dB N.A for BT2500
Channel difference
±1 dB N.A for BT2500
Signal to Noise Rao(A-weighted): 67 62 dB
Crosstalk between inputs /sources
60 50
250 – 10,000 Hz
Hum (Volmin --- Volmax -20dB) 200 nW
Residual Noise(Volume Minimum) 40 - nW
THD, Maxmium 0.8 1.0 %
Balance between inputs /sources
±3 dB
Source input condition:
Audio Input Sensitivity(±3dB) rated output power at 1kHz
Tuner N/A
CD/MP3 N/A
Bluetooth -3dB 1KHz sine wave( 2.0HS)
MP3_link(Aux in) 250mV±50mV; Rin ≥ 22kΩ