Philips BT3000 - Page 2

Specications
Amplier
Total Output Power 5 W
Signal to Noise Ratio > 67 dB
Audio-in Input 600 mV RMS 20 kohm
Bluetooth
Bluetooth Version V3.0
Supported Proles HFP, A2DP, AVRCP
Range 10 m (Free space)
General information
Power Supply
- AC Power
(power adapter)
Brand name: PHILIPS;
Model: ICP12-050-1500D;
Input: 100-240 V~, 50/60 Hz, 0.3 A;
Output: 5 V 1500 mA;
- Battery 4 x 1.5 V LR6 AA
Operation Power
Consumption
1.95 W
Dimensions - Main Unit
(W x H x D) 280 x 121 x 93 mm
Weight - Main Unit 1.3 kg
Enter Bluetooth pairing mode;
Disconnect Bluetooth connection.
2”
123-456-7890
After Bluetooth connection, you can control an incoming call with this speaker.
Button Function
Press to answer an incoming call.
Press and hold for 2 seconds to reject an incoming call.
During a call, press to end the current call.
Note: Music play pauses when there is an incoming call.
Note: To switch to audio-in mode, make sure that there
is no Bluetooth connection, or music playback through
Bluetooth is paused.
PHILIPS BT3000
2”
Play from Bluetooth-enabled devices
1 On the speaker, press and hold for 2 seconds.
» The LED indicator ashes blue.
2 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices.
3 Select [PHILIPS BT3000] on your device to start pairing and connection. If necessary,
enter default password “0000”.
» After successful pairing and connection, the speaker beeps twice, and the
LED indicator turns solid blue.
• If you fail to nd [Philips BT3000] for pairing, press and hold PAIRING for two
seconds to enter pairing mode.
4 Play audio on the Bluetooth device.
Note:
• Keep away from any other electronic device that may cause interference.
• Before connecting another Bluetooth device, disconnect the current device
rst.
4 x AA
The product can be powered by either AC mains or batteries.
2”
ON/OFF
Press and hold for 2 seconds to turn on the speaker.
» The LED indicator ashes blue.
» If the battery is low, the LED indicator ashes red.
BT3000_98_SUM_V1.0.indd 2 8/3/2015 3:02:48 PM