Using the appliance
Brewing coffee
1 Fillthewatertankwithwater(Fig.5).
- The graduations on the left are for large cups (120 ml) (Fig. 6).
- The graduations on the right are for small cups (80 ml).
2 Openthelterholder(Fig.7).
3 Takeapaperlter(type1x4orno.4)andfoldthesealededgestopreventtearingand
folding(Fig.8).
4 Putthelterinthelterholder(Fig.9).
Note: Some versions come with a permanent lter. In this case you do not need a paper lter.
5 Putpre-groundcoffee(lter-negrind)inthelter(Fig.10).
- For large cups: use one heaped measuring spoon or tablespoon of ground coffee for each cup.
- For small cups: use one level measuring spoon or tablespoon of ground coffee for each cup.
6 Closethelterholder.(Fig.11)
7 Putthejuginplace(Fig.12).
Put the jug in the appliance with the handle pointing straight forward or to the right. Make sure the
lid of the jug is in ‘closed/brewing’ position r.
8Pressthepower-onbuttontoswitchontheappliance.Theapplianceswitchesoff
automaticallyafterbrewing(Fig.13).
During brewing, you can switch off the appliance by pressing the on/off switch on the back of the
appliance. When you press the switch back on, the appliance continues brewing until the water tank
is empty.
9Whenallthewaterhaspassedthroughthelter,youcanremovethejugfrom
theappliance(Fig.14).
Using the insulated jug
The best way to keep the coffee hot is to rinse the jug with hot water before brewing and to brew
a full jug.
1 Topouroutcoffee,turnthelidtotherightbymeansofthenuntilthearrowonthelid
pointstowardsthe‘pour’symbole.(Fig.15)
Always close the lid after pouring coffee to keep the coffee hot.
2 Toclosethelid,turnittotheleftbymeansofthenuntilthearrowonthelidpoints
towardsthe‘closed/brewing’symbolr.(Fig.16)
3 Toremovethelidfromtheinsulatedjug,turnittotheleftbymeansofthenuntil
thearrowonthelidpointstowardsthe‘removelid’symbolt.(Fig.17)
4 Removethelterholderandthrowawaythepaperlter(Fig.18).
5 Ifyouhaveusedthepermanentlter,emptyandrinseit.
ENGLISH8
Downloaded from www.vandenborre.be
To Next Page
Loading...
