Philips CD 910 - Page 6

OPERATION
Guz
Ysi]
REMOTE CONTROL (CD 920 only)
— The buttons on the remote control have the same
functions as the corresponding ones on the player.
— PREV(ious) = @ TRACK and NEXT = TRACK Bm.
— The life of the batteries of the remote control is
around one year. For replacement only use
batteries of the type RO3, UM4 or AAA.
“IMPORTANT! |
When the player is incorporated in a HiFi system
with ESI BUS connection, the [R SENSOR OFF |
ON switch (4) on the back of the player should
always be in the OFF position.
When the player is not incorporated in a HiFi
system with ES! BUS connection, the switch
should be in the ON position.
‘When 1 Switching the IR.SENSOR on and off,
the CD. player should always be switched off.
L
DISPLAY
TRACK TOTAL REM TRACK TIME AUTOSPACE
REPEAT 1
(WO sHurrie | F*
PROGRAM
REPEAT -— Lights up when you repeat a CD or a
programme.
REPEAT 1 — Lights up when you repeat a track.
((O (CD 920 only) - Lights up when the player
receives a command from the remote control
(IR SENSOR ON).
SHUFFLE - Lights up when the tracks are played
in random order.
PROGRAM
~ Flashes when a programme is being compiled.
— Lights up when a programme is being played.
TRACK - Indicates:
— what track is being played;
— the number of tracks on the CD or in a programme.
TRACK TIME - Indicates the elapsed playing time
of the track being played.
REM(aining) TRACK TIME - indicates the
remaining playing time of the track being played.
TOTAL REM(aining) TIME - Indicates the remaining
playing time of the CD or a programme.
TOTAL TIME -— Indicates:
~ the elapsed playing time of the CD or a programme;
~— the total playing time of the CD or a programme.
PAUSE - Lights up when play is interrupted.
AUTOSPACE - Lights up when an extra pause is
inserted between the various tracks in the EDIT
and CD DUBBING mode.
TIMER EDIT — Lights up when the player is put
1-15 track number indicator — Shows the number
of tracks on the CD.
+15 — Lights up when there are more than 15 tracks
on the CD.
6
Edit — Lights up when the player is put into the
EDIT mode.
Err — Lights up if you make a mistake when
operating the player.
-- -- —-— --Lights up when the CD's contents
list is being scanned.
no diSC - Lights up when you try to start play
while there is no CD in the compartment.
PLAYBACK (PLAY/REPLAY)
e Press POWER STANDBY/OFF to switch the
player on.
¢ Open the CD compartment by pressing
OPEN/CLOSE.
— OPEN lights up.
¢ Insert a CD, printed side up, and close the
compartment.
--- = -— - =lights up; the number of tracks
and the playing time of the CD are shown on the
display.
e Press PLAY/REPLAY to start play.
You can also press PLAY/REPLAY immediately
after inserting the CD; the compartment then
closes automatically.
— The number indicator shows how many tracks
are on the CD; when a track has been played
its number disappears.
~ The track being played is always shown under
TRACK and its elapsed playing time is shown
under TRACK TIME.
— Play will stop after the last track.
e Press POWER STANDBY/OFF to switch the
player off.
You can interrupt playback by pressing PAUSE;
PAUSE then lights up. Press PLAY/REPLAY to
restart; if you first press PAUSE again and then
PLAY/REPLAY, the current track starts again from
the beginning.
If you press PLAY/REPLAY during play, the current
track starts again from the beginning.
You can stop playback by pressing STOP/CP or
OPEN/CLOSE.