Philips CDR880 - Professional Service Safety Guidelines; Fire and Shock Hazard Precautions; Leakage Current Testing Procedures; Critical Parts Replacement Guidelines

t - =
’ > -
ad woot - ew Ne em rn re ee een ee ee ree oe ee —_ + -_ oS
CONNECTION
The numbers between parentheses refer to the front fold-out.
Optical digital connections
1 For recording and playing (using a suitable fibre-optic cable,
available from your supplier) connect the CD-Recorder to a
digital amplifier (with optical connections) based on the diagram
below. To do so, remove the dust caps from the digital optical
connections. We recommend that you save the caps.
Note:
- Direct recording can also be made from another digital source with
optical connections, such as a CD player, DCC recorder, DAT
recorder or digital satellite receiver.
- For playing, the optical digital output (42) on the CD-Recorder
must be connected to the digital input on an amplifier.
(PRE-) AMPLIFIER - CD PLAYER - DCC RECORDER
DAT RECORDER - DIG. BROADC. - SAT. REC.
IN OUT
A
~D
L™ ouT
OPTICAL
= 5
| ff? 9359™ |=
te
Cy Cre
6660 Chis