Philips CEM210/98 - Page 17

18
3 Turn to select a setting.
5HFHLYHWUDIÀFDQQRXQFHPHQW
,I\RXGRQRWZDQWWRPLVVWUDIÀF
announcement during enjoying music, you
FDQWXUQRQWKH7$7UDIÀF$QQRXQFHPHQW
function.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [TA] is
displayed.
3 Turn to select a setting:
 [TA ON]:KHQWKHUHLVWUDIÀF
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the announcement on
WUDIÀFFRQGLWLRQV:KHQWKHWUDIÀF
announcement is over, it returns to
the previous mode.
 [TA OFF]7UDIÀFDQQRXQFHPHQW
does not cut in.
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock
of the unit automatically.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [CT] is
displayed.
3 Turn to select a setting:
 [CT ON]: Turn on the RDS clock.
Time shown on the unit synchronize
with that on the RDS station.
 [CT OFF]: Turn off the RDS clock.
Tip
The accuracy of the transmitted time depends 
on the RDS station that transmits the time
signal.
EN