41
Problem
Possible cause Solution
The appliance
produces no steam
or irregular steam.
The steamer has not
Let the appliance heat
up for approximately
Steam has condensed
in the hose.
Lift the steamer head
to straighten the hose
verticAlly. This allows any
Low water level in the
tank or the tank is not
inserted properly.
insert it properly.
Too much scale has
built up in the
appliance.
Perform de-calc process.
Refer to section.
Water droplets drip
from the steamer
head or the
appliance produces
a croaking sound.
You have left the
steamer head and/or
the steam supply hose
in horizontal position
for a long time.
Lift the steamer head to
straighten the hose
vertically. This allows any
When the hose forms a
U-shape, condensation
back into the water
tank.
Lift the steamer head to
straighten the hose
vertically. This allows any
An excessive amount
of water drips out
of the steamer head
when the appliance is
heating up.
The water in the
appliance is dirty or
has been left inside the
appliance for a long
time.
Perform de-calc process.
Refer to section.
Water leaks out from
the steamer base.
You have not closed the
water tank cap or de-
calc knob securely.
The water tank is not
inserted properly.
Close the water tank cap or
de-calc knob securely.
Insert the tank properly.
EN
To Next Page
Loading...
