To Next PageTo Next Page
Need help?Do you have a question about the Philips CoreLine Waterproof WT120C G2 EL MDU and is the answer not in the manual?
General| Model | WT120C G2 EL MDU |
|---|---|
| Category | Lantern |
| Optical cover/lens type | Polycarbonate |
| Ingress protection code | IP65 |
| Impact protection code | IK08 |
| Operating temperature | -20 to +40 °C |
| Housing Material | Polycarbonate |
| Power | 20 W |
| Luminous Flux | 2000 lm |
| Color Temperature | 4000 K |
| IP Rating | IP65 |
| Voltage | 220-240 V |
| Lamp Type | LED |
| Lamp Life | 50, 000 hours |
| Material | Polycarbonate |
| Weight | 1.5 kg |
| Frequency | 50/60Hz |
| Light source color | Neutral white |
Guidance on optional mounting to prevent vandalism.
Instructions for mid- or side-entry cable knockout.
Configuration guide for the microwave motion sensor using DIP switches.
Details on sensor detection range and optimal mounting height.
Procedure for initial sensor calibration and warm-up.
Step-by-step instructions for replacing the luminaire driver.
Notes on non-replaceable parts, electronics, and battery life.
Explanation of automatic detection and setting of emergency time.
Requirements and procedures for emergency lighting periodic testing.
Essential safety advice for luminaire servicing.
Guidance for replacing the light source and external flexible cable.
Instructions for product storage, installation, and operation.
