Philips D2701B/25 - Page 14

EN14
4 Calls
Note
• When the power fails, the phone cannot
access emergency services.
Tip
• Check the signal strength before you
make a call or when you are in a call (see
Section ‘Check the signal strength’ on
page 12).
Make a call
You can make a call in these ways:
• Normal call.
• Predial call.
You can also make a call from the redial list
(see Section ‘Redial a call’ on page 25),
phonebook list (see Section ‘Call from the
phonebook’ on page 19) and call log (see
Section ‘Return a call’ on page 23).
Normal call
1
Press or .
2
Dial the phone number.
»
The number is dialed out.
»
The duration of your current call is
displayed.
Predial call
1
Dial the phone number.
• To erase a digit, press .
• To enter a pause, press and hold .
2
Press or to dial out the call.
Note
• The talk time of your current call is
displayed on the call timer.
• If you hear warning tones, the phone is
almost out of battery or out of range.
Charge the battery or move the phone
close to the base station.
Answer a call
When there is an incoming call, the phone
rings. Press or to answer the call.
Warning
• When the handset rings or when the
hands-free mode is activated, keep the
handset away from your ear to avoid ear
damage.
Note
• The caller ID service is available if you
have registered to the caller ID service
with your service provider.
Tip
• When there is a missed call, a
notication message appears.
Turn o the ringer
1
To turn o base ringer:
• While the base station is ringing for an
incoming call, press repeatedly until
no base ringing is heard.
2
To turn o handset ringer:
• When the phone is idle, press and hold
on the handset until [RINGER
OFF] is displayed.
• While the handset is ringing for an
incoming call, press repeatedly
until [VOLUME OFF] is displayed. Press
to conrm.
»
When the handset ringer is o,
appears on the screen.
End a call
You can end a call in these ways:
• Press ;
• Place the handset to the base station
or charging cradle.