Philips D2701B/25 - Page 27

27EN
11 Handset
settings
You can customize the handset settings to
make it your own phone.
Ring settings
Set the handset’s ringtone volume
You can select among 5 ringtone volume
levels or [OFF].
Note
• If the ringer volume is set to o, the
handset is silenced for all incoming calls
except paging tone.
1
Press .
2
Select [HS SETTINGS] > [RING SETUP]
> [RING VOLUME], then press to
conrm each selection.
3
Select a volume level, then press to
conrm.
»
The setting is saved.
Set the handset’s ringtone
You can select from 10 ringtones.
1
Press .
2
Select [HS SETTINGS] > [RING SETUP],
then press to conrm each selection.
3
Select [EXT. RING] to set an external call
ringtone, then press to conrm.
»
The setting is saved.
4
Select [INT. RING] to set an internal call
ringtone, then press to conrm.
»
The setting is saved.
Tone settings
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Press .
2
Select [HS SETTINGS] > [TONE SETUP]
> [KEY TONE], then press to conrm
each selection.
3
Select [ON] or [OFF], then press to
conrm.
»
The setting is saved.
Set the battery tone
Battery tone is the sound made when the
battery is low and needs recharging.
1
Press .
2
Select [HS SETTINGS] > [TONE SETUP]
> [BATTERY TONE], then press to
conrm each selection.
3
Select [ON] or [OFF], then press to
conrm.
»
The setting is saved.
Set the “out of range” tone
“Out of range“ tone is the sound made when
the handset is out of range and needs
moving closer to the base station.
1
Press .
2
Select [HS SETTINGS] > [TONE SETUP]
> [OUT OF RANGE], then press to
conrm each selection.
3
Select [ON] or [OFF], then press to
conrm.
»
The setting is saved.